Synthesis and properties of thermosetting polymers from a phosphorous‐containing fatty acid derivative

A new phosphorous‐containing fatty acid diepoxide was obtained from 10‐undecenoyl chloride and 10‐(2′,5′‐dihydroxyphenyl)‐9,10‐dihydro‐9‐oxa‐10‐phosphaphenanthrene‐10‐oxide and crosslinked with 4,4′‐diaminodiphenylmethane and bis(m‐aminophenyl)methylphosphine oxide. The properties of the thermosetting materials were evaluated by differential scanning calorimetry, dynamic mechanical thermal analysis, thermogravimetric analysis, and limiting oxygen index (LOI). Thermal and thermooxidative degradation was studied by gas chromatography/mass spectrometry, FTIR, ³¹P magic angle spinning NMR spectroscopy, and scanning electron microscopy. LOI values indicate good flame‐retardant properties that are related to the formation of a protective phosphorous‐rich layer that slowed down the degradation and prevented it from being total. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5630–5644, 2006     

Thermal properties of poly(styrene) containing brominated aryl phosphate additives

General purpose poly(styrene) is a large volume commodity polymer widely used in a range of applications. For many of these the presence of an additive to impart some flammability resistance is required. Most commonly, brominated aromatics are used for this purpose. As the polymer undergoes combustion these compounds decompose to generate bromine atoms and/or hydrogen bromide which escape to the gas phase and trap flame propagating radicals. While these species are effective in inhibiting flame propagation they present the opportunity for loss of halogen to the atmosphere. For this reason, the use of these compounds is being limited in some parts of the world. Phosphorus compounds, on the other had, impart a flame retarding influence by promoting char formation at the surface of the burning polymer. This prevents heat feedback to the polymer and consequent pyrolysis to generate fuel fragments. The combination of both bromine and phosphorus present in a single compound might generate a superior flame-retarding additive in that both modes of retardancy might be promoted simultaneously. Should this be the case smaller amounts of additive might be necessary to achieve a satisfactory level of flame retardancy. A series of such additives, brominated aryl phosphates, has been synthesized and fully characterized spectroscopically. Blends of these additives, at various levels, with poly(styrene) have been examined by DSC, TG and in the UL-94 flame test. The flammability of the polymer is dramatically diminished by the presence of the additive.     

兖州高硫煤的加氢热解脱硫及脱硫动力学

在加压热天平上，考察了氢气和氮扬气氛下高硫煤的热解脱硫。利用气相色谱在线分析研究了硫化氢氢气的逸出规律。结果表明，加氢热解比氮气下的热解有着更显著的脱友作用，脱硫率可达９０％以上。而且加氢热解下６５％的脱除硫转化为气相硫化氢，而氮气下热解是有８０％的硫转化为液相。     

外加无机电解质对煤浆性质调控作用的研究

考察了数种无机电解质对煤浆分散体系流变特性的影响。结果发现，煤浆的流变特性不仅与电解质种类有关，还取决于煤质特征。某些煤适，适量的无机电解质可使浆体的屈报胀塑料转化为屈服假塑性。     

火焰原子吸收法测定鸡尾木中无机元素的含量

鸡尾木(ExcoecariaVenenataS.LeeetF.N.Wei)属大戟科,海漆属,为民间药用珍贵植物,用于治疗牛皮癣、慢性湿疹等,疗效颇佳[1]。鸡尾木中无机元素,尤其是医学微量元素的测定对其药理效的研究有重要的参考价值。1　实验部分1 1　仪器及试剂TAS 986原子吸收分光光度计(北京普析通用仪器有限责任公司);空心阴极灯:Fe、Cu、Ni、Cr、Cd、Zn、Co、Ba、Ca(北京瑞利普光电器厂);Mg、Pb(北京真空电子技术总公司);Mn(北京市朝阳天宫电器厂);AdventurerTM电子天平(奥豪斯国际贸易〈上海〉有限公司)。标准储备液:配制Zn2+、Mg2+、Fe3+、Mn2…     

不同常压流化床煤气化方案的模型预测 Ⅰ. 模型建立及验证

为评价不同气化方案对常压流化床气化的影响，从化学动力学角度并结合化学平衡建立了流化床气化模型，该模型考虑了煤热解和气化所经历的各反应过程。模型预测结果与文献报道的试验数据吻合较好，气化组分的平方误差和在10%左右，表明该模型可以用来预测各种气化方案对常压流化床气化的气化过程、生成煤气组分和气化效率等方面的影响。     

气相色谱-质谱法测定电子电气产品中多溴二苯醚及多溴联苯

建立了利用气相色谱-质谱测定电子、电气产品中多溴二苯醚及多溴苯的方法。对样品的粉碎、提取方法、色谱柱的选择、测定条件进行研究,并自建标准质谱图库;采用保留时间、Br同位素规则、质谱特征离子、谱库检索等4种方式相结合进行定性,避免了假阳性及漏检的情况,结果更加准确可靠。本法检出限为5mg/kg,PBDEs的回收率为91.3%,PBBs的回收率为92.5%,相对标准偏差(RSD)为4.3%。与现有方法相比,本法分离时间最短(6min),具有简便快速、实用性强、灵敏度高、准确可靠等特点,适用于电子电气产品、塑料、橡胶、汽车内饰材料等的溴系阻燃剂分析,满足欧盟RoHS指令检测的要求。     

平朔气煤的煤岩显微组分结构研究

用显微光度计、扫描电子显微镜(SEM)、傅立叶变换红外光谱(FTIR)、X射线衍射光谱(XRD)和X光电子能谱(XPS)等测试手段研究了平朔气煤的等密度梯度离心分离(DGC)显微组分富集物的结构。结果表明,镜质组和稳定组结构相似,含氧基团基本相同,但丝质组结构则不同,它含有较多的羧基和羰基。根据实验结果讨论了三种显微组分的大分子结构,认为它们是由许多结构相似而又不相同的结构单元所构成。镜质组和稳定组的单元核心主要为脂环、缩聚芳环,环数为5—6个;丝质组单元核心主要为缩聚芳环,环数为7—8个,环缩合程度最高,芳香层片在空间排列规则,相互定向程度大。     

内蒙风化煤对镉离子溶液的吸附行为

本文利用内蒙风化煤[1,3]作吸附剂对镉离子溶液中的镉的吸附性能、特征和机理进行探索,以利内蒙风化煤的深度开发利用。1　实验内蒙风化煤(腐植酸含量高达41 3%)。空气中风干研细后,过80目筛。用3ＣｄＳＯ4·8Ｈ2Ｏ和Ｈ2ＳＯ4配制含Ｃｄ(Ⅱ)酸性溶液[4],镉含量采用ＡＡ 670原子吸收分光光度法(日本岛津)测定。吸附实验采用静态分析方法。准确称取一定量的风化煤放入干燥的250ｍｌ锥形瓶中,加入25ｍｌ一定浓度的含镉溶液,在室温下连续振荡2ｈ,静置0 5ｈ,过滤,分析滤液中的镉含量。取6ｇ内蒙风化煤于250ｍｌ磨口锥形瓶中,移入25ｍｌ1000ｍ…